Car workshops that offer the service Brake master cylinder remanufacturing

            Searching for a trusted car workshop that offers the service Brake master cylinder remanufacturing? Browse prices, reviews & promotions of our 218 recommended car workshops. Find the best workshop for the service Brake master cylinder remanufacturing!

            Proper operation of the master cylinder ensures your safety. The master cylinder is an integral part of the main braking system. The cylinder pressurizes the brake fluid supplied into the brake callipers and cylinders by means of brake hoses. Faulty operation of the master cylinder affects the entire system. Master cylinders tend to leak. If this is the case, you have to replace a leaking cylinder with a new one or have it reconditioned. In most modern cars, however, the cylinders cannot be reconditioned and require replacing. Find out more about the service

            218 results

            INTEGRA - DUNDOVIĆ

            Josipa Huttlera 31, Centar, 31000 Osijek

            +385 31 *** *** ***

            Naš poslovni cilj jest: Nikada u potpunosti biti zadovoljni sa onime što smo do sada napravili, kako bi uvijek mogli raditi na sebi, mijenjati se kada je to potrebno, te time biti bolji u pružanju naših usluga i kako bi ukupno zadovoljstvo svih naših kupaca bilo potpuno.

             


            Tvrtka Integra Dundović d.o.o., ovlašteni Toyota centar za regiju Slavonija je tvrtka koja se od samog svog osnutka bavi automobilskim biznisom, na više razina. Tvrtka danas broji 30 uposlenih radnika, a jedna od naših najvećih vrijednosti jest činjenica da su neki zaposlenici naši djelatnici već preko 25 godina, što dovoljno govori o lojalnosti naših djelatnika i razini naše stručnosti u autobiznisu.


            Koliko smo uspješni u tome što radimo i na koji način prezentiramo Toyota brand govori i činjenica da smo u zadnji 6 godina 5 puta proglašeni za najboljim Toyota centrom u Republici Hrvatskoj, te smo po navedenim rezultatima dobili nagradu ICHIBAN, što je ujedno i najvrijednija nagrada proizvođača koju jedan Toyota centar može dobiti, a samo priznanje je rezultat ocjena koje su nam dodijelile naše cijenjene stranke, nakon osobnih iskustava sa odjelima prodaje i postprodaje.


            Naš poslovni cilj jest: Nikada u potpunosti biti zadovoljni sa onime što smo do sada napravili, kako bi uvijek mogli raditi na sebi, mijenjati se kada je to potrebno, te time biti bolji u pružanju naših usluga i kako bi ukupno zadovoljstvo svih naših kupaca bilo potpuno.


            Evo i kratkog osvrta kako smo i kada nastali. Tvrtka Integra - Dundović nastavlja obiteljsku tradiciju posla započetog davne 1987. godine. Tada je obitelj Dundović otvorila Limolak - Dundović, mali zanatski obrt, gdje su osnovne djelatnosti bile lakirerski i limarski radovi. Dinamika poslovnih uvjeta i mladi naraštaj obitelji Dundović uvjetuju promjene u vidu novih ulaganja, a jedno od njih je otvaranje poduzeća Integra - Dundović, osnovanog 20. 09. 2002. godine. Ovo tada novo poduzeće postaje ovlašteni prodavatelj Honda programa vozila i motocikala za područje Slavonije i Baranje. Koncem godine tj. 01. 07. 2004. postaje ovlašteni prodavatelj i serviser Toyota vozila za Osječko-baranjsku i Vukovarsko-srijemsku županiju.


            Svim budućim strankama zainteresiranim za kupovinu novih TOYOTA ili rabljenih vozila, onima koji trebaju usluge ovlaštenog TOYOTA servisa, limarsko-lakirerskih usluga i svih dodatnih djelatnosti koje su dio autobiznisa nudimo da nas posjete u našem prodajno-servisnom centru i da se uvjere zašto nam već godinama mnogi ukazuju svoje povjerenje i sa nama grade zajedničku budućnost! jer, znate kako kažu, "Jednom TOYOTA, zauvijek TOYOTA!"

            ...
            1 - 20 results from 218 found workshops

            Brake master cylinder remanufacturing

            Tips

            • A leaking master cylinder affects the operation of the braking system and may disable it altogether
            • After having the master cylinder replaced with a new one or reconditioned make sure to bleed the braking system

            Scope of services

            • Removing the hoses connected to the master cylinder
            • Removing the master cylinder
            • Disassembling the master cylinder and removing the worn parts from it
            • Fitting in new parts (e.g. gaskets, rings and cylinders)
            • Fitting the cylinder and the hoses back in place
            • Refilling the system with fresh braking fluid
            • Bleeding the system

            Service Description

            Where is the master cylinder located?

            The master cylinder is connected to the brake pedal. Its role is to properly pressurize the brake fluid, which is transferred through brake hoses into brake callipers and cylinders, in order to decelerate all car wheels. The cylinder is equipped with a reservoir containing brake fluid, from which it is delivered to the cylinder, and into which its excess is transferred. The cylinder consists of a housing, acting as a cylinder, and a piston with seals.

            Why does the master cylinder wear?

            The piston moving repeatedly inside the cylinder causes gradual wear of the seals, and, consequently, causes the fluid to leak in between the pump's sections and outside the braking system. Leaking fluid reduces the efficiency of brakes and affects the elements located near the cylinder, as it causes damage to the varnished surfaces and penetrates the power brake servomechanism, causing brittleness and cracking of the rubber membrane.

            How is the master cylinder replaced?

            If your master cylinder needs changing, you should have it done by a professional garage, as the procedure requires putting new fluid into the braking system and removing air from it. Replacing the cylinder boils down to unscrewing the hoses connected to it and the bolts by means of which it is attached to the servomechanism. A new cylinder is fitted in the reverse order.

            What to keep in mind?

            After removing air from the system, a test drive should be performed to check the operation of the brakes. Some master cylinder types require replacement of only piston seals, however, if the cylinder's housing is worn, the new seals will quickly disintegrate, causing another failure. The best idea, though, is to replace the entire cylinder to make sure that it is 100 per cent operational, as it is responsible for your safety.

            FAQ

            What is the average cost of providing Brake master cylinder remanufacturing in car workshops?

            The cost of Brake master cylinder remanufacturing ranges from 200 HRK to 250 HRK. The average cost of Brake master cylinder remanufacturing is 225 HRK. Remember that the final price of the service is influenced by many factors, including car brand and model, the level of complexity of activities and the location of components that require replacement or repair. Therefore, a set of spare parts should be added to the total price of the service Brake master cylinder remanufacturing. You will know the cost of purchasing a part when arranging the service Brake master cylinder remanufacturing in the selected workshop.

            What is the scope of the service Brake master cylinder remanufacturing?

            The Brake master cylinder remanufacturing service consists of the following activities:
            • Uklanjanje crijeva povezanih s glavnim cilindrom
            • Uklanjanje glavnog cilindra
            • Skidanje glavnog cilindra i uklanjanje istrošenih dijelova
            • Ugradnja novih dijelove 
            • Montirajte cilindar i crijeva natrag na mjesto
            • Punjenje sustava sa svježom kočionom tekućinom

            What should I know, and what are the recommendations for Brake master cylinder remanufacturing?

            While doing Brake master cylinder remanufacturing service, keep the following in mind:
            • Neispravan glavni cilindar utječe na rad sustava kočenja i može ga potpuno onesposobiti
            • Nakon što je glavni cilindar zamijenjen novim ili repariran, provjerite kočioni sustav

            What car workshop networks offer Brake master cylinder remanufacturing?

            Car workshop networks that offer Brake master cylinder remanufacturing are: Bosch Service, Q-Service, Vulco

            Are there car workshops that offer the possibility of online booking for the service Brake master cylinder remanufacturing?

            You can choose one of the 198 car workshops offering the service of Brake master cylinder remanufacturing, for which you will arrange the service via the online form. After submitting the form, the selected car workshop will contact you and set the details and date.

            Workshops from other popular locations

            Pick one of the popular locations to see more car workshops and mechanics from that area and find the best car workshop for your vehicle.

            Workshops that support some of the popular car brands

            If you are looking for a car workshop or mechanic that can support a specific car brand, pick that brand from the list below and find the best car workshop for your vehicle.

            The site uses cookies. Learn more about how to use them and change your settings. By using this site you agree to use cookies in accordance with your current browser settings. More information in our privacy policy.