Car workshops that offer the service Radars calibration (RCS)

            Searching for a trusted car workshop that offers the service Radars calibration (RCS)? Browse prices, reviews & promotions of our 6 recommended car workshops. Find the best workshop for the service Radars calibration (RCS)!

            Radar systems on vehicles are a new system of active safety on the vehicle. The beginning of use was in vehicles of a high and higher class, and recently it has taken an increasing share in both, the middle and lower segment of vehicles. As a result, it gained in the mass application, and at the same time increased active traffic safety. In combination with lane-change systems, traffic sign recognition, and emergency braking assistance, it is better known as the ADAS system (Advanced Driver Assistance System). Modern technology has enabled the rapid exchange of information within various systems on the vehicle via optical cables so that the reaction of the system itself sometimes takes action to prevent or reduce accidents independently of the driver. The only vehicle through the radar beam follows the movement of vehicles in the lane by the driver selected. Any change in the lane, which the driver "did not announce to the system" by giving a turn signal, the system will correct and return the vehicle to the original direction of travel. Also, if a sign recognition system is present, the vehicle will only adjust the speed according to the set signalization. The braking assistance system, based on the information of the radar beam reading and the speed of the vehicle, calculates the safe stopping distance of the vehicle and the braking force to prevent the vehicle from crashing into an observed obstacle of any kind. If the driver has not taken the action of decelerating the vehicle himself, the system, via the ABS, starts the deceleration independently, and if necessary, stops the vehicle at a safe distance. If an accident is inevitable, the vehicle will be slowed down so that the consequences of the accident are as low as possible, ie to prevent the death of the participants in the accident. The radar beam itself is placed by the vehicle manufacturers in the front part of the vehicle under the hood of the vehicle at a height of 260 - 1000 mm, measured from the pavement. The orientation of the radar beam is the longitudinal imaginary axis of the vehicle itself. Find out more about the service

            6 results

            Centrum Auto Kft.

            Jegenye sor, Balatonkiliti, 8600 Siófok

            +36 70 *** *** ***
            Q-Service
            Preview from the price list
            • Radars calibration (RCS)
              from14 990,00 HUF

            Fábián Szerviz Kft.

            Dévay Gyula u, 2051 Biatorbágy

            +36 30 *** *** ***
            Q-Service
            Preview from the price list
            • Radars calibration (RCS)
              from15 000,00 HUF
            1 - 6 results from 6 found workshops
            • 1

            Radars calibration (RCS)

            Tips

            • Connecting the vehicle to diagnostic equipment
            • Installation of calibration plates in front of the vehicle. The plates are selected according to the type and model of the vehicle
            • Positioning of the clamps on the front wheels plus corrective clamps on the rear wheels
            • Digital wheelbase alignment for wheelbase
            • Defining calibration position points depending on the vehicle model, and adjusting the radar beam of the radar itself
            • Beam angle adjustment of 3 °
            • Start of calibrating the radar beam

            Scope of services

            • Radar beam adjustment with diagnostic equipment
            • Vehicle optics
            • Vehicle radar replacement in the event of a malfunction

            Service Description

            The front radar is intended for work on a vehicle with an unlimited shelf life. Like every vehicle assembly, it is subject to inspection, adjustment, and, if necessary, its replacement. It is especially useful during bad weather and reduced visibility, heavy rains, fog, heavy snowfall, reduced visibility, and night driving.

            Control and adjustment must be performed at each major service interval for vehicle maintenance, as prescribed by the vehicle manufacturer. Replacement of the radar beam sensor is mandatory in the event of an accident on the vehicle, and adjustments after minor repairs to the body parts of the front of the vehicle or replacement of the radar beam sensor.

            Calibration of the radar beam sensor is required in case of an incorrect reading of the radar beam, change of the shock absorber on the vehicle or parts of the vehicle chassis, and replacement of the windshield, as well as the search for an electrical fault on the vehicle.

            Depending on the vehicle manufacturer, the calibration of the radar beam sensor can be performed by the static method in the workshop, but with some manufacturers, it is necessary to perform a dynamic test or calibration of the radar beam while driving.

            For an accurate radar beam, properly adjusted vehicle optics of the front and especially the rear wheels are of utmost importance. If the vehicle's optics are not adjusted to the vehicle manufacturer's values or the vehicle is modified outside the vehicle manufacturer's permitted values, the radar beam will change its field of action. In this case, it can easily happen that on a straight road the vehicle starts to slow down, regardless of the driver's will, because the radar beam instead of the vehicle in front of it read the movement of the vehicle moving in the opposite lane towards it. Also, since the height of the radar beam sensor position has changed, the angle of inclination is wrong so that the radar beam may not read the obstacle in front of the vehicle, and all associated active safety systems simply do not respond, or they respond with reduced efficiency or delay.

            FAQ

            What is the average cost of providing Radars calibration (RCS) in car workshops?

            The cost of Radars calibration (RCS) ranges from 14990 HUF to 15000 HUF. The average cost of Radars calibration (RCS) is 14995 HUF. Remember that the final price of the service is influenced by many factors, including car brand and model, the level of complexity of activities and the location of components that require replacement or repair. Therefore, a set of spare parts should be added to the total price of the service Radars calibration (RCS). You will know the cost of purchasing a part when arranging the service Radars calibration (RCS) in the selected workshop.

            What is the scope of the service Radars calibration (RCS)?

            The Radars calibration (RCS) service consists of the following activities:
            • Radar-érzékelő beállítása diagnosztikai berendezéssel
            • Járműoptika
            • A jármű radar-érzékelőjének cseréje üzemzavar esetén

            What should I know, and what are the recommendations for Radars calibration (RCS)?

            While doing Radars calibration (RCS) service, keep the following in mind:
            • A jármű csatlakoztatása a diagnosztikai berendezéshez
            • Kalibráló referenciatáblák felszerelése a jármű elé. A táblák a jármű gyártója és típusa szerint választják meg
            • A beállító-fejek elhelyezése az első kerekeken, valamint a hátsó kerekeken
            • Digitális tengelytáv-igazítás a tengelytávhoz
            • A kalibrálási pontok meghatározása a jármű modelljétől függően, és maga a radar radarnyalábjának beállítása
            • A sugárzási szög 3 ° -kal állítható
            • A radarnyaláb kalibrálása

            What car workshop networks offer Radars calibration (RCS)?

            Car workshop networks that offer Radars calibration (RCS) are: Q-Service

            Are there car workshops that offer the possibility of online booking for the service Radars calibration (RCS)?

            You can choose one of the 5 car workshops offering the service of Radars calibration (RCS), for which you will arrange the service via the online form. After submitting the form, the selected car workshop will contact you and set the details and date.

            Workshops from other popular locations

            Pick one of the popular locations to see more car workshops and mechanics from that area and find the best car workshop for your vehicle.

            Workshops that support some of the popular car brands

            If you are looking for a car workshop or mechanic that can support a specific car brand, pick that brand from the list below and find the best car workshop for your vehicle.

            Workshops that offer some of the most popular services

            Pick one of our most popular car workshop services and find the list of best car workshops and mechanics for that service.

            The site uses cookies. Learn more about how to use them and change your settings. By using this site you agree to use cookies in accordance with your current browser settings. More information in our privacy policy.