ABS master cylinder replacement

ABS master cylinder replacement
You will get the exact price of the service after sending the form

The ABS pump, also referred to as the modulator, is responsible for the proper operation of the entire ABS system. When an ABS sensor detects a difference in the rotational speed of the wheels, the pump adjusts the pressure of the brake fluid in the entire system and thus prevents the wheels from locking during braking. The most common cause of its malfunction is worn brake fluid or a faulty control unit.

Read more
Tips icon


  • Change your brake fluid in conformity with the manufacturer's recommendations
  • The braking fluid should be changed each time the ABS pump is replaced
  • A pump malfunction may be caused by a faulty ABS control unit.
Range of services icon

Range of services

  • Releasing the brake fluid from the system
  • Disconnecting the brake hoses and the power cables
  • Removing the ABS pump
  • Fitting a new pump in
  • Refilling the system with fresh brake fluid
  • Venting the braking system
  • Checking system for potential leaks
  • Programming of the ABS modulator

Car workshops: ABS master cylinder replacement

Service description

What is the role of an ABS system?

An ABS system prevents a car's wheels from blocking during sudden braking. A car equipped with an ABS system remains manoeuvrable even during hard braking, allowing the driver to bypass an obstacle while suddenly decelerating the car. All modern cars are obligatorily equipped with an ABS system. Brakes equipped with an ABS system substantially work the same way as the conventional ones, however, they are equipped with an ABS pump, also referred to as the modulator, fitted into the hydraulic hoses system. The pump controls the pressure in the braking system whenever the ABS controller detects a wheel skid.

How does an ABS pump work?

An ABS pump is comprised of an electrical engine, electromagnetic valves and a base to which the brake hoses are connected. An ABS pump is not repairable and requires replacing if defective. The replacement process is complicated as it requires disconnecting the brake hoses by means of a specialist tool, followed by disconnecting electrical cables, and, finally, the pump itself.

What to keep in mind

After disconnecting the old pump and connecting a new one, the brake fluid must be refilled and air must be removed from the braking system. Removing air from an ABS system requires a diagnostic tester, which controls the opening of the pump valves, allowing removal of air from all of its circuits. Finally, a test drive should be performed in order to ensure that the brakes operate properly and that there are no leaks on the joints disconnected during the replacement process.

The site uses cookies. Learn more about how to use them and change your settings. By using this site you agree to use cookies in accordance with your current browser settings. More information in our privacy policy.