Steering gear remanufacturing

Steering gear remanufacturing
You will get the exact price of the service after sending the form

The steering gear transmits the movement of the steering wheel onto the wheels. The most popular type of the steering gear is the steering rack. Worm or screw gear is a rarity nowadays. If it fails, you may notice leaks, feel play on the steering wheel, hear a clatter when turning the wheels, feel the steering assistance being unevenly distributed or not being provided at all, as well as notice that the steering wheel does not return to its previous position after a turn.

Read more
Tips icon


  • Drive over bumpy surfaces with your wheels straight
  • When you drive into a hole, release the brake
  • Avoid turning the wheels when your car is stationary
  • When changing the rack check the steering rod housings
  • Make sure you have your wheels aligned after changing the rack
Range of services icon

Range of services

  • Removing the steering rack
  • Assessing the wear of steering rack elements
  • Replacing all worn parts with new ones
  • Machining some of the elements (rack, pinion)
  • Replacing the seals, guides
  • Fitting all the components back in place
  • Test on a diagnostic pit

Car workshops: Steering gear remanufacturing

Service description

What is the steering rack?

The steering rack connects the track rods of the front wheels and translates the rotary motion of the steering wheel into the linear motion of the track rods, causing the car's wheels to turn. Any leak, seizure of or play in the steering rack requires its repair or removal.

How is the steering rack replaced?

Replacing the steering rack requires lifting the car and removing its front wheels. Next, the track rod ends must be unscrewed from both knuckles. If your car is equipped with power steering, the hoses leading to the steering box pump should also be disconnected. Next, the braces holding the rack to the body (usually the dividing wall separating the engine chamber from the cabin) are unscrewed. Fitting a new rack requires providing new rubber pads. The power steering system should also be filled with fresh fluid. A new rack is fitted in the reverse order.

What to keep in mind?

Finally, the front wheels alignment should be checked and a test drive should be performed. Remember that driving with a faulty steering rack causes not only a discomfort and annoying noise, but also environment pollution resulting from leaking hydraulic fluid. In extreme cases, a worn and malfunctioning rack may result in an accident e.g. if it blocks after a turn and is prevented from going back to its neutral position.

The site uses cookies. Learn more about how to use them and change your settings. By using this site you agree to use cookies in accordance with your current browser settings. More information in our privacy policy.